Email has become an integral part any professional environment. A lot of information is sent via mail. Email was the preferred method of communication when I worked in customer service. It was like “if your mail does not work, then you cannot work at all.” It is obvious that you should be familiar with the basics of email troubleshooting. Most cases can be solved by us. Below are a few issues that can easily be solved without the involvement of a third party, which saves everyone a lot of time.
Verify that your email address is correct. This is the most common mistake that we make. Double-checking the email address you have entered is a good idea. If the email address is not correct, you might receive error messages such as ‘XXXX user does not exist on this platform’ or ‘DNS Error: Domain not found’. If the error message refers to the domain name, it is the part after ‘@’,. When the error message refers to the user, it’s the first part, i.e. ‘@’.
Check that your settings are correct. When you first configure your email, there are several steps. You can check that your settings are correct by clicking on “Accounta Settings”.
Restart your computer: This seems to be the best solution to any problem. Outlook uses special files to send and receive emails. Restart can be used to rebuild these files.
You can read the error message. Email issues can usually be resolved if the error messages have been properly understood and read. A detailed error message will be displayed on an email that has been rejected. Although you might not be able decipher the entire message, you can attempt to understand the main message. These two reasons could be the reason why the mail was rejected.
Mailbox full: This is the problem with the recipient’s mail. The mailbox of the recipient to which you sent mail is full and can not accept new emails. We can only help the recipient to resolve the issue. There is nothing you can do.
IP on block list: This is another problem that cannot be solved by us. Sometimes, servers through which we send emails may be on one or more block lists. These block lists are used to prevent spam mails. Although the error message may be technical, it is worth sending the mail again if the message contains the words “block”.
Spam: A particular office environment may prevent you from sending any attachments, words, or images. It is important to understand the problem in order to resolve it. For example. Our office had rules that prohibited us from sending attachments to emails outside of network mails. The email would not be delivered. Your office rules may consider certain words in emails spam. This would limit the sending and receiving of such email.
These steps may not resolve the problem. If the issue is a network issue, contact your customer service or the technical team. To make it easier for them to fix the problem, be sure to take screenshots or record any error messages.
Logitrain offers the best IT Training Courses. For more information, visit www.logitrain.com.au. Or call 1800 159 151.
The world has changed. This is why? Smartsheet transforms your work.
What are the three main variables (or triple constraint)? What are the three main variables (or triple constraints) in project management?
If you’ve ever taken a project management course, you’ve probably already answered the question.
Since over 50 years, the triple constraint theory has been the standard for project management. It can be more complex when applied to real-life situations.
This article will discuss:
What are the Three Constraints to Project Management Management?
How does the Triple Constraint function?
A Triple Constraint Experiment
Why are the Triple Constraints of Project Management Not a Triangle?
Tips for managing the Triple Constraint IRL
What are the Three Constraints of Project Management Management Management?
The “iron triangle”, and the “project management triangular”, are also known as “iron triangle” or “project management triangle”. They refer to the relationship between project scope, time, and cost.
Quality is the key to the iron triangle of project management (scope, time, and cost). Let’s take a closer look at each side to better understand the project triangle.
The scope of a project refers to the scope, breadth, reach, and limits of the work that will be done. It also includes the number of products and services that will be offered, along with the description of what is being done and how many. The complete SoW guide contains more information about scopes and guidelines for writing them.
Simply put, it is the time taken to complete the project/tasks within it.
The project cost is the amount (financial and otherwise) needed to complete the work. These costs can include labor, hardware, and software charges as well as any other fees.
How does The Triple Constraint work
The triple constraint is more than a cute mnemonic device. The three constraints of project management are based upon the fact that all three factors, scope, time, and cost, are interdependent.
Simply put, if you change one side of a triangle, it will also affect the other sides. This will bring you back to geometry class.
The most common triple constraint model shows that quality is dependent upon project scope, budget, and time spent. It places “quality” at the center of the triangle to illustrate this. You must adjust the sides to maintain a consistent quality level or in geometry class, an area within a triangle.
This idea is intuitive, math aside. If you need something faster (time), you will pay more. Sometimes you can save money (cost), by delivering a simpler product (scope).
The triple constraint is especially useful when speaking to clients, both in defining the scope of a project as well as when dealing with change requests. Digital agencies operate in a highly competitive market. They are often under pressure to produce a complete product as quickly as possible. as possible.
It is possible to do this in some situations, but the project management triangle reminds us that projects cannot be simultaneously comprehensive and cost-effective. We need to know our priorities before we can decide “what’s gotta stay”.
The iron triangle teaches us that a Venn Diagram for Dream Project (comprehensive, fast, and cheap) is often just that- a wish. A Triple Constraint is an example
What does it look like in practice? Let’s take a look at a website design project.
Scope: Ecommerce website
Time: 6 months
Imagine the client initially believing that they could provide content from their team, including a SEO-friendly product description. Their team doesn’t have h
What is Triple Constraint Theory for Project Management?
The triple constraint theory may sound complicated but it is actually very simple.
Let’s start with a definition. The triple constraint theory is the basis of project management. Every project must be within the constraints of cost, time, and scope. Any changes in one of these factors will have an effect on the others.
Clients who want to add multiple features to their project will need to budget more money. If your boss reduces your project budget, you may need to reduce project requirements.
It’s all about making compromises. As a project manager, it’s your responsibility to balance these constraints and manage expectations so that everyone understands what it takes to make a project successful.
The project management triangle
The triple constraint theory is often used to describe the project management triangle. Each point or side of this triangle represents one of three constraints that project management faces: cost, time, or scope.
Let’s get a little deeper into each project constraint.
Scope: Triple constraint
Scope creep can sneak up and take advantage of you in a strange way. Before you know it, “just one more thing” has become a completely different project deliverable.
Before any work begins, it is crucial to clearly define and document your project goals and requirements. This will ensure that everyone is clear about what “done” and that there is a project truth to refer back to if the scope changes.
Adding extra features to a project can increase its budget and time constraints. Project costs can rise if you need to extend the deadline or add people to the project. You can monitor scope changes and make adjustments before the project gets off track.
Triple constraint: Time (schedule)
Project management is time-consuming. This is something that most people are aware of. This is especially true if your goal is to maintain the scope. A shorter deadline means you will need more resources to complete the project on time.
A detailed scope document is the best way for you to understand the time constraints of your project. It can also be used to estimate the project’s cost. Involve your team in the discussion. Think beyond task hours. It doesn’t matter how many meetings you attend or how close you are to a stakeholder.
The more accurate your estimate, the better it will be. This estimate will be what you use to schedule work and make decisions about the project, if needed.
Triple constraint: Budget (cost).
Your project budget will also reflect the effort and time spent on the project. These are the costs to consider when creating a project budget.
Resource costs are calculated based on the estimated hours (or stories points, in Agile).
Budget constraints can be communicated quickly and often. Nobody likes being surprised by a large bill, or the tense conversations that follow.
Unexpected expenses are possible. Prepare to explain the impact on other projects and let your client decide whether it’s worth it. Your client might not be an expert in project management and may not know the exact cost of this shiny new feature.
The easiest way to create project plans
You can create a beautiful project planning in just 10 minutes. With a single click, you can switch between calendar and gantt views.
Get your free plan
TeamGantt, a modern Project Management Software, allows you to complete projects on time and within budget.
Try TeamGantt NowTry TeamGantt NowHow can you use triple constraint
Triple constraint theory is all well and good. How can you put this project management framework into practice?
It’s all about keeping the ball in your sight. Here are some i
Ray received a degree from the University of Texas in Telecommunications in late 1980s. Ray has worked for many companies, including IBM, ROLM, and MCI Worldcom. Ray was also present in the early days VOIP on LANs. Since 2001, he has been a Global Knowledge instructor. He has taught many Telecom courses, including those offered by Nortel and Avaya. He then taught Networking classes. This led to him certifying, instructing and certifying on CompTIA A+, Net+, and the EC-Council’s CEH. He teaches the Global Knowledge developed Cybersecurity Foundations course. One of the models is used in this webinar. Ray has a son in college who is studying Cybersecurity. This skill set is vital in today’s job market, as every organization must be capable of protecting itself against ever-growing cyber threats. This webinar will cover Cybersecurity Foundations Security+ Certification Prep. Preparation to ensure your relevance. Similar Courses: Cybersecurity Foundations Security+ Certification Prep Course
Many companies use TeamGantt for managing their projects. Today, we want to highlight one company. You may have heard a lot recently about them. Treehouse is a company that is changing lives through providing a low-cost and high-quality way for people to learn iOS technology and web development. After completing the course, it helps people find jobs.
Treehouse members host large web conferences which allow people to learn the most recent web design and development techniques. Treehouse founder and CEO Ryan Carson wanted more people to learn these skills, without having to spend a lot on travel, conference passes or hotels. Online classes were the obvious choice. Many people can now learn what they want online without having to spend a lot of money on expensive training and conferences. Treehouse provides high-quality videos and expert instructors to help people learn the skills they want.
Ryan Carson wanted TeamGantt’s help to see the whole picture of what he was doing. They wanted to launch the project in time for New York’s big FOWD conference.
Treehouse is made up talented people from the UK and US. They needed project management software that would allow them to remotely manage their projects. TeamGantt allowed everyone to log in to view their gantt chart and update their progress. They could also see the work they had to do in order to keep the project moving forward.
Treehouse was launched just two weeks ago and word is rapidly spreading about its amazingness! We are extremely excited about Treehouse’s work and encourage everyone to visit it!
We would love to hear from other companies about how they use TeamGantt.
The easiest way to create project plans
You can create a beautiful project planning in just 10 minutes. With a single click, you can switch between calendar and gantt views.
Get your free plan
No matter how secure your data, systems and networks are, hackers can still get into your company and gain access to your sensitive information. Organizations hire red team members to think and behave exactly like hackers, but with good intentions.
Red team members use a process to discover vulnerabilities and exploit them. This procedure is broken down into steps and red team members use different tools for each step. Let’s take a look at some of the most important tools that red team members use during each phase.
Reconnaissance: Reconnaissance, one of the most important steps in any red-team assessment, is a popular and highly valued step. This stage is where the red team gathers all information about the target network or system. These are the three most popular reconnaissance tools:
Nmap: Nmap, a widely used and highly effective tool for reconnaissance, is one of the most popular. It is a network scanner and has many useful features. The Red Team can learn a lot about any computer that can reach the network via Nmap. Network scanning must be used with care as it is easy to detect.
Censys: Censys allows you to gather data about all your assets to help you prevent target assaults. This application provides actionable data, assists in tracking assets’ changes and identifies possible weaknesses.
Shodan: Shodan can be described as a search engine for devices connected to the internet. IoT devices are widely used and have poor security. They can be a great entry point for a Red Team. Shodan can help you classify these devices.
Accessing the target’s information: After the red team has collected all relevant information, they can then exploit the vulnerabilities to gain access to the organization’s networks and systems. They must then maintain that access. Here are some tools to help red teams gain and keep access.
Ncat: Information security experts refer to NCAT as the Swiss Army knife for security. This program’s main function is to establish a connection to any port using TCP/UDP. It can scan port numbers, grab banners and grab data, as well as create remote shells.
SET: A Social Engineering Toolskit (SET) lets you create phishing attacks and assess your customers’ resistance to social engineering. This tool can be used to create phishing emails, websites, or malicious attachments.
Metasploit: Although Metasploit is a primarily commercial tool, the community edition of Metasploit is still very powerful. Metasploit Framework: With over 1,500 exploits built and the ability to integrate custom ones, it is the most popular exploitation framework in the world.
The Red Team can access the customer’s network to provide valuable information. Passive network reconnaissance is not enough. Active network reconnaissance can reveal the network infrastructure, services used by different machines, and user credentials if there are insecure protocols being used. These are the tools that can be used to analyze network traffic.
Aircrackng: Aircrackng is a tool that is included with Kali Linux. It is used to hack WiFi networks. This tool combines a packet scanner, a WEP/WPA2/WPA2 cracker and network analysis tool into one application. This tool can be used for hacking into wifi networks.
Wireshark: Wireshark is a network protocol analyzer that captures packets from network connections such as those connecting to the internet or your home office. Data packets are the discrete units that make up an Ethernet network. Wireshark is the most widely used packet sniffer in all of history.
Reporting: After compl
An Offensive Cybersecurity engineer is a security professional who has a deep understanding of the penetration testing process. He is efficient working within the offensive security group. His day-today responsibilities include identifying and fixing problems in complex and extensive IT infrastructure. He hacks the system with offensive security skills and contributes to the technical operations, engineering, architecture, and design of secure platforms. An offensive security engineer is also skilled in reviewing source code, web applications, security architectures, and finding solutions to potential cybersecurity threats. He must be familiar with the various automated security tools in order to efficiently perform his duties. These highly-performing automated tools save time and work efficiently. Here’s a list of powerful offensive security instruments that work together for Offensive Cyber Security Engineers.
Shodan – Shodan is a powerful search tool. It is used by offensive cybersecurity teams for detecting vulnerable endpoints in the network. While other search engines like Google index the web content, Shodan can detect IoT devices. Shodan is a search engine that can detect all things connected to the internet. It can detect webcams, servers, traffic lights and home security systems. Shodan also provides a command-line interface (CLI), which is packaged with the Python library. This interface is much more efficient than the original Shodan website. The Shodan CLI is used by penetration testing teams to identify vulnerable devices within the network.
This is used to detect vulnerabilities in networks and systems
Shodan API (Application Programming Interface), allows security teams to automate their security operations
Easy integration with other tools like Maltego or web browser plugins
Wireshark: Wireshark can be used as a network protocol analyser and is a free and essential tool. It gives security professionals detailed information about network traffic. This tool can capture data packets in real time and determine their origin and destination. It can be used to troubleshoot issues such as dropped packets, latency issues and malicious activity.
Live packet capture and offline analysis of data packets
Facilitates investigation of the smallest details of the network
All major internet protocols supported
Available in CLI (Command line interface) and GUI(Graphical User Interface) versions
Supported platforms include Linux, Windows, macOS and Solaris.
Maltego – Maltego is an open source intelligence gathering tool (OSINT), that allows you to analyze online information. It is difficult to gather information using manual techniques. Maltego automates the process and saves time for the offensive security team. It presents the collected data in an easily-understand entity-relationship diagram.
Automates the information gathering process
Graphic representations allow for easy analysis of data
This allows offensive security teams to function more efficiently and intelligently
Supported platforms are Linux, Windows, and macOS
Hydra: Hydra can crack passwords. It uses brute force attack methods to get different usernames and password combinations. Hydra can be used in conjunction with programs like ‘crunch” and ‘cupp, which can create a wordlist. Hydra uses these wordlists to guess login credentials. It can attack various protocols including HTTP, IMAP and HTTPS.
Flexible and highly efficient password cracker
Supports a wide variety of services and protocols for attack
Facilitates easy addition of new attacking module
Supported platforms include Linux, Windows, macOS and Solaris.
Metasploit: Metasploit can be used in many areas of cybersecurity. It allows security professionals to finance.
Are you ready to take Microsoft skills to the next level? Microsoft’s genius extends beyond their ubiquitous software. As part of a global initiative to improve the software and programming industry, Microsoft’s experts have created an online treasure trove of training courses. The best part? There are bound to be the right certifications for everyone, from beginners to professionals.
One of their most acclaimed courses is Dynamics 365. These courses are primarily for functional consultants and are highly regarded. Continue reading to learn more about Microsoft’s MB certifications, and our top picks for its online courses.
What is Microsoft Certification MB Courses?
This certification is a boon for developers, functional consultants, and business owners who work with Microsoft Dynamics 365 Sales. Microsoft Certified: Dynamics 365 offers a variety of courses that each focus on a specific role. These courses range from Business Central Functional Consultant Training (MB-880) to Finance and Operations Apps Solution Architect Trainings (MB-700). Each course will help you market your skills and empower the sales team with Dynamics 365 proficiency.
Top 3 Microsoft MB Certifications That Are Worth Your Time
Microsoft Dynamics 365 Fundamentals (MB-910T00).
Let’s start with the basics, as with everything else. The Microsoft MB-910T00 course will give you a basic overview of Dynamics 365’s customer service capabilities. As you learn to use each of the customer engagement apps (Dynamics 365 Marketing, Dynamics 365 sales, Dynamics 365 Customer Service and Dynamics 365 Project Operation), you will have a better understanding of customer engagement.
Microsoft Dynamics 365 Sales (MB-210T00)
If you want to improve your sales management skills, the Microsoft Dynamics 365 Sale course is a must-attend. The MB-210T00 course will teach you how to use Dynamics 365 Sales to track sales targets and best practices, and more. As you learn how to customize the application and automate your sales process, you will be a more productive sales professional.
Microsoft Dynamics 365: Finance and Operations Apps Solution Architect – (MB-700T00).
This course is a great next step for anyone who has experience in Dynamics 365: Finance or Operations Applications. This instructor-led course will provide you with a thorough understanding of the application and help you get started in this field. It focuses on technical skills and application architecture.
You Can Master Microsoft From The Comfort of Your Own Home
Don’t hesitate to take advantage of the opportunity provided. Microsoft’s MB courses will transform your career. Trainocate makes it even easier! Reach out to us immediately to learn more about the most sought-after Microsoft certifications.
Your risk is outweighed by a competitor offering better features and security than you. In today’s digital world, consumers need security and privacy, as well as improved optimization for every program, website, and software.
Table of Contents
What is Penetration testing? Types of penetration testingTop Penetration testing methods
To build a security feature on your products, however, it is a good idea to conduct security testing. There are many security checks that can be done on IT products. Penetration testing is one of them. We will now explain penetration testing and the related methods.
What is Penetration Testing?
Penetration testing is a formal and systematic method of assessing an organization’s overall security. This method simulates a cyberattack against an organization’s security architecture (such as its network, apps and users) to identify vulnerabilities. It evaluates the organization’s security processes, tactics, and protocols. Penetration testers look for design flaws and operational weaknesses to improve the system. The vulnerability assessment results are then documented for the top management and technical viewers.
Types of penetration testing
Black Box Testing: The penetration tester is familiar with the system being tested. The hacker simulation has no knowledge of the product’s IT infrastructure. The hacker attempts to find and exploit flaws in the IT infrastructure.
White Box Testing: This is the opposite to black-box testing. Hackers have a good understanding of source code and software architecture.
Gray Box Testing: Gray boxes are used for penetration testing. This is done to create a situation where the hacker only has a basic understanding of the product’s IT systems.
Top Penetration Testing Methodologies
A methodology for penetration testing describes how a penetration test plan is developed and executed. The systematic identification of security flaws in a company is possible with penetration testing procedures. These methods define the steps an organization takes to identify security flaws in its IT essential assets, offers, or processes. These are the most highly-respected penetration testing methods in the industry:
1. Open Source Security Testing Methodology Manual (OSSTMM). One of the most popular penetration testing methods is the Open Source Security Testing Methodology Manual, or OSSTMM. The Institute for Security and Open Methodologies maintains a peer-reviewed method. OSSTMM allows organizations to tailor their penetration tests to meet their specific needs. Developers have direct access to more secure areas in their environment for innovation. OSSTMM also includes checks to ensure that laws and regulations are being followed. OSSTMM is a common choice among penetration testing methods because it combines technical guidance, device users for different locations, and broad support from different types of organizations.
2. Open Web Application Security Project OWASP. The Open Web Application Security Project OWASP is a set standards and guidelines that are used to protect web applications. It is often used as a starting point by IT professionals who are new to penetration testing. This methodology can be used to perform web application penetration testing. It can detect common vulnerabilities in web and mobile applications and complex logic issues that result from poor design. This methodology is a great way for enterprises to protect their web and mobile apps from common flaws that could potentially impact them. These principles can be implemented by enterprises when they are developing new online or mobile applications.
Microsoft Azure, like other Cloud platforms, is dependent on Virtualization technology. Virtualization emulates computer hardware in Software. This is possible because the maximum number of computer hardware can operate by following an encoded set instructions. Software can be used to simulate real hardware by mapping the instructions.
Cloud providers manage large numbers of data centers that have a large number of physical servers that run virtualized hardware. It flows on a large number of servers and networking hardware. It hosts a complex collection applications that control the configuration and operation of the Software and virtualized hardware. Azure’s innovative orchestration is what makes it so revolutionary. Azure takes care of all the maintenance and upgrades, so users don’t have to spend their time on them.
Microsoft Azure is the second-largest and fastest growing cloud computing platform on the market. It also offers an online portal that allows you to access and manage Microsoft resources and services. It offers many services in different domains, including Compute, Database and Content Delivery. It can host an existing application or allow you to develop a new one.
It also allows you enhance your on-premises applications. Azure allows customers to easily scale up or down their application according to changing demands. More than 80% of Fortune 500 companies use Microsoft Azure. Cloud providers have large data centers that house a variety of servers, storage systems, as well as critical components for an organization’s work. This makes it extremely secure.
Microsoft Azure Security Certification
Azure’s wide range of security tools and capabilities is perhaps the best reason to use it for your applications and services. These capabilities and tools are essential for securing the Azure stage. Microsoft Azure provides transparency and accountability, as well as confidentiality, integrity, availability, and availability of customer data.
Azure’s infrastructure is designed to support large numbers of clients simultaneously. It provides a reliable foundation that allows organizations to meet their security requirements. Microsoft’s new role-based certification program, AZ-500 Microsoft Azure Security Technologies, provides a clear understanding about the Security domain of Microsoft Azure Cloud Service. Applicants who pass the AZ500 exam earn the Microsoft Certified: Azure Security Engineer Associate certificate.
Path to Microsoft Azure Security Certification (AZ500)
Although not required, it is highly recommended that you complete the following certifications before you apply for the Microsoft AZ-500 Certificate:
1. Microsoft Azure Fundamentals AZ-900 – This course provides an in-depth understanding of the various components of Microsoft Azure. You can choose to take the AZ-900 – Microsoft Azure Fundamentals Online Training & Certificate Course with InfosecTrain.
2. Microsoft Azure Administrator AZ-104: This certification validates candidates’ abilities to manage cloud services including storage, computing, security, and other Microsoft Azure capabilities. You can choose to receive AZ-104 Microsoft Azure Administrator Training & Certificate with InfosecTrain.
Benefits of AZ500 Certification
Azure provides you with a wide range of configurable security options and the ability to manage them. This allows you to tailor security to meet the unique requirements of your organization’s deployments. The AZ-500 certification has several benefits:
1. Engineers who are interested in security and playing a key role in p2 will benefit from this certification.